Voice iQ Upgrade

This confirms purchase of your S Series™ iQ update.

• The code below is only usable for the following serial number xxxxxxxx
• Please enter code xxxxxxxx into the Inspire® software and click the Update button
• IMPORTANT: If you are requesting two codes for a binaural fitting, enter both codes prior to clicking the Update button
• Once complete the status bar on the bottom left of the screen will say Product Update Complete and there will be a green check below each aid upgraded
• Click finish and you will return to the Devices Detected Screen

Remember the following:

• Hearing aids should be removed from patient’s ear before initiating the upgrade
• If the hearing aid is disconnected during the update, reconnect and Inspire will continue the upgrade
• If you should need to reboot you may use the same code for the serial number above
• The Update must complete before you will be able to read the aids

If you have questions regarding your product upgrade, please contact
Technical Support at 1-800-328-8602.

Starkey Laboratories, Inc. • 6700 Washington Avenue South • Eden Prairie, MN 55344
800.328.8602 • www.starkey.com • www.starkeypro.com

© 2010 Starkey Laboratories, Inc. All rights reserved.